Ariel can provide a fan drive shaft on the auxiliary end of the smaller compressor frames. The fan drive shaft is to be used without a side load. The shaft should be supported with an outboard bearing pillow block pair if used with a side loading similar to a belt drive load. The fan drive shaft can be used up to the power limitations listed below.
The JGJ/2 shaft will require a pillow block arrangement for all applications to limit the axial thrust on the frame bearings.
|
Frame |
Fan Drive Shaft Horsepower (max) |
|
JGM:P:N:Q |
15 hp |
|
JGA/2, JGA/4 |
15 hp |
|
JGJ/2 |
30 hp |
|
JGJ/4 |
50 hp |
Fan Drive Shaft Drive End
Ariel Corporation Application
Manual
6 November 2006