| CTB-171 |
ARIEL JGE AND JGT FRAME OPERATION |
5/8/2008 |
5/8/2008 |
| CTB-170 |
COMPRESSORS SUPPLIED WITH BICERA CRANKCASE RELIEF VALVES - SHIPPING, INSTALLATION AND MAINTENANCE
|
5/1/2008 |
5/1/2008 |
| CTB-169 |
KBB:V TOP COVER END GASKETS ORIENTATION |
4/8/2008 |
4/8/2008 |
| CTB-168 |
CANISTER LUBE OIL FILTERS - PIPING FLANGE FACE CHANGE LARGER RECIPROCATING COMPRESSORS |
4/8/2008 |
4/8/2008 |
| CTB-167 |
PROFLO FORCE FEED LUBE FLUID FLOW MONITOR - BATTERY CHANGE |
4/8/2008 |
4/8/2008 |
| CTB-166 |
PACKING-CASE BOLT HOLE DEPTHS IN CYLINDER BODIES - 3-3/8RJ-FS:-VS, 4 -3/8K-VS-H2S & 4-3/8T-VS-H2S CLASSES |
2/14/2008 |
2/14/2008 |
| CTB-0 |
TABLE OF CONTENTS-ARIEL CUSTOMER TECHNICAL BULLETIN - REGISTER |
2/19/1999 |
2/14/2008 |
| CTB-165 |
CHANGE IN FAN SHAFT ASSEMBLY PROCEDURE AND TORQUE VALUE - JG:A/2/4 & JGM:N:P:Q/2 |
2/4/2008 |
2/4/2008 |
| CTB-164 |
NEW PISTON CRANK-END CLEARANCE SETTING TOOL FOR 2-3/4M, 3M, 2-3/4P-CE AND
3-1/4P-CE CLASS CYLINDERS |
1/10/2008 |
1/10/2008 |
| CTB-163 |
COUPLING ALIGNMENT - COUPLING-HUB-FACE MAXIMUM TOTAL INDICATOR READING ALLOWABLE |
12/3/2007 |
12/3/2007 |
| CTB-162 |
CAUTION CONCERNING TRAPPED GAS IN HOLLOW COMPRESSOR PISTONS & HEAD-END VARIABLE |
12/3/2007 |
12/3/2007 |
| CTB-161 |
3-7/8RJ, 3-7/8RJ-CE, 3-7/8RJ-HE & 5-1/2E, 5-1/2E-HE,5-1/2ET, 5-1/2ET-HE, 5-1/2RJ, 5-1/2RJ-HE CLASSES COMPRESSOR CYLINDERS - STANDARD VALVE CHANGE |
12/3/2007 |
12/3/2007 |
| CTB-160 |
NEW FORCE FEED LUBE PUMP TO LUBE BOX GASKET - PRODUCT IMPROVEMENT - RECIPROCATIN |
11/21/2007 |
11/21/2007 |
| CTB-159 |
USE AND RETURN OF SHIPPING BRACKETS AND BOLTING AT BOTTOM OF CROSSHEAD GUIDE |
11/20/2007 |
11/20/2007 |
| CTB-158 |
REQUIREMENTS AND RECOMMENDATIONS FOR ARIEL COMPRESSORS APPLIED IN COMPRESSING AIR |
6/14/2007 |
6/20/2007 |
| CTB-156 |
RG357M HYDRAULIC CYLINDER TIE RODS PRODUCT IMPROVEMENT - ROTARY COMPRESSORS |
6/5/2007 |
6/7/2007 |
| CTB-155 |
RG357M CAPACITY CONTROL TAG CHANGE - ROTARY COMPRESSORS |
6/5/2007 |
6/7/2007 |
| CTB-157 |
CROSSHEAD GUIDE DEFLECTION VALUES ARE PROVIDED IN THE ARIEL PERFORMANCE PROGRAM |
6/6/2007 |
6/6/2007 |
| CTB-154 |
THERMAL GROWTH ESTIMATES - RECIPROCATING COMPRESSORS |
5/25/2007 |
5/25/2007 |
| CTB-153 |
RG282M & RG357M ROTARY COMPRESSORS-MOUNTING HARDWARE RETROFIT FOR PENNY & GILES |
4/19/2007 |
5/8/2007 |
| CTB-152 |
3-5/8JG; 3-5/8JG PRC; 3-5/8JG-CE:-HE & 2-3/4P-CE CYLINDER CLASSES RATING CHANGE |
4/11/2007 |
4/12/2007 |
| CTB-151 |
CONVERTING AN A-11731 TENSION TOOL TO AN A-14027 TENSION TOOL |
4/11/2007 |
4/12/2007 |
| CTB-138 |
WITHDRAWN & SUPERSEED BY CTB-152 |
4/12/2007 |
4/12/2007 |
| CTB-150 |
AR260 ROTARY COMPRESSORS - MECHANICAL SEAL REPLACEMENT |
3/29/2007 |
3/29/2007 |
| CTB-149 |
PISTON ASSEMBLY / PISTON AND ROD ASSEMBLY CLARIFICATION |
3/15/2007 |
3/15/2007 |
| CTB-148 |
JGZ:U COMPRESSOR CROSSHEAD - PRODUCT IMPROVEMENT |
3/15/2007 |
3/15/2007 |
| CTB-147 |
RG282/M & RG357M LUBE OIL DIFFERENTIAL PRESSURE GAUGE/SWITCH REPLACEMENT |
2/20/2007 |
2/20/2007 |
| CTB-146 |
GASKET SHIFT IN CYLINDERS 4-1/8JG, 8SP-HE,
4-3/8SP, AND 11JGJ THAT USE HANGING GUARD SUCTION VALVES WITH HIGH-CLEARANCE SPACERS |
1/3/2007 |
1/3/2007 |
| CTB-145 |
DATA PLATES FOR RJ AND HJ CYLINDER CLASSES - SHIPPED PRIOR TO 1999 |
8/3/2006 |
8/4/2006 |
| CTB-144 |
DATA PLATES FOR VARIABLE VOLUME CLEARANCE POCKETS - 6-1/2JG AND 6-1/2J CYLINDER |
1/23/2006 |
1/23/2006 |
| CTB-143 |
CRANKCASE OVER-PRESSURE RELIEF VALVES - RECIPROCATING COMPRESSORS IN AIR SERVICE |
1/11/2006 |
1/11/2006 |
| CTB-142 |
ENTERING SLEEVES FOR COMPRESSOR CYLINDERS WITH STEP IN BORE |
12/9/2005 |
12/9/2005 |
| CTB-141 |
NEW MAIN BEARING TEMPERATURE ALARM AND SHUTDOWN REQUIREMENTS - RECIPROCATING
COMPRESSORS |
9/15/2005 |
9/15/2005 |
| CTB-140 |
3SG-CE & 3-5/8SG-CE CLASS CYLINDERS SUCTION VALVE CHANGE |
9/12/2005 |
9/12/2005 |
| CTB-139 |
SYSTEM DESIGN CONSIDERATIONS & APPLICATION OF PNEUMATIC ACTUATING SYSTEMS FOR CYLINDER UNLOADING |
9/9/2005 |
9/9/2005 |
| CTB-137 |
FORCE FEED LUBE BLOW-OUT FITTINGS, RUPTURE DISKS & TUBING |
4/5/2005 |
4/5/2005 |
| CTB-136 |
ARIEL SUPPLIED PRO-FLO DEVICE ISSUES |
3/8/2005 |
3/9/2005 |
| CTB-135 |
ARIEL VALVE SELECTION PROGRAM |
11/2/2004 |
11/4/2004 |
| CTB-134 |
INSTALLATION OF FACE CUT PISTON RINGS |
10/15/2004 |
10/15/2004 |
| CTB-133 |
TIGHTENING CONNECTING ROD BOLTING WITH TORQUE AND TURN |
9/16/2004 |
9/16/2004 |
| CTB-132 |
JGC:D CONNECTING ROD & SLEEVE BEARING CHANGE |
9/16/2004 |
9/16/2004 |
| CTB-131 |
COMPRESSOR ROD PACKING CASE CUPS OIL-DRIP CHANGE |
9/9/2004 |
9/9/2004 |
| CTB-130 |
PROTECTION OF THE PROFLO WHEN ARC WELDING |
9/2/2004 |
9/2/2004 |
| CTB-129 |
CHAIN ADJUSTMENT |
7/26/2004 |
7/26/2004 |
| CTB-128 |
MAINTENANCE INTERVALS FOR CHECKING FASTENER TORQUE TO PRESSURE CONTAINING AREAS AND ALIGNMENT |
5/3/2004 |
5/3/2004 |
| CTB-127 |
WITHDRAWN & SUPERSEED BY CTB-141
|
5/3/2004 |
5/3/2004 |
| CTB-126 |
4-1/8JG-HE, 4-1/8JG:W, 4-1/8M & 4-3/8SP-CE CLASS CYLINDERS RE-FIT FOR SUCTION VALVE INTERFERENCE |
2/23/2004 |
2/24/2004 |
| CTB-125 |
ARIEL BOLTING CHANGES |
1/12/2004 |
1/16/2004 |
| CTB-124 |
CENTER-LINE MARKS ON RECIPROCATING COMPRESSOR FRAMES |
12/17/2003 |
12/29/2003 |
| CTB-123 |
JG, M, P, SP CLASS COMPRESSOR CYLINDERS - STANDARD VALVE AND RETAINER CHANGE |
11/7/2003 |
11/10/2003 |
